The managed gigabit L3 switch WI-PCMS5554F-L3with PoE function is designed for integration into modern high-speed IP telephony networks, IP video surveillance, Wi-Fi. The functionality of the switch allows using it in the vast majority of corporate tasks.
48 x 10/100/1000 802.3af/at PoE ports and 6 x 10G SFP+ 370W PoE budget
CPU: MIPS 800 MHz Memory and RAM: DRAM 512 MB, flash memory 32 MB
Switch Properties
Standards and Protocols: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.1x, IEEE802.1q, IEEE802.1p, IEEE802.1d, IEEE802.1w, IEEE802.3ad, IEEE802.3af, IEEE802.3at Forwarding Mode: Store and Forward Throughput: 216 Gbps Packet Service Rate: 161 Mbps MAC Address Table: 16K Buffer Size: 12 MB Jumbo Frame: 12 KB
Nutrition
100-240V AC 50/60Hz Consumption: 43.5W idle, 413.5W at 100% load with PoE
Physical characteristics
Number of fans: 5 Dimensions: 440 x 330 x 44 mm Weight: net: 5.6 kg; gross: 6.53 kg Installation: desktop, rack
Reliability
Resistance to voltage surges: • standard mode ± 4 kV • differential mode ± 2 kV Protection against electrostatic interference (ESD protection): • contact discharge ± 6 kV • air venting ± 8 kV
Temperature and humidity
Operating Temperature: -10~50 °C Storage Temperature: -40~70 °C Operating Humidity: 10~90% RH non-condensing Storage Humidity: 5~90% RH non-condensing
Certificates
CE, FCC, RoHS, UKCA, RCM
Software Features
System configuration
IP Configuration: • Static IP • Dynamic Address Web Configuration: • Web Timeout • HTTP • HTTPS • Security IP • ACL User Management: • User Management • Authentication Method Firmware Upgrade: • TFTP Service • FTP Service • HTTP Upgrade IPV4 ACL / IPV6 ACL: • TFTP • HTTP NTP User Priority Device Management: • Reboot Device • Use Device • View System Configuration • View Logging Buffer • View Logging Flash
Monitor Management
SSH Config Telnet Config Port Statistics DDMI Status Ping Traceroute Cable Diagnostics SNMP Config: • Global Config • User Config • Group Config • Community Config • View Config • Security IP Config • SMNP Statistics Onvif Config: • Server Config • Detect Config Loopback Detection: • Port Mode • VLAN Loopback MQTT Configure: • Enable • Disable • Discovery Configure LLDP Config: • Global Config • Port Config • TLV Config • Neighbor Info
Switch Configuration
Port Config: • Port Config • Port 10G Mode Port Mirror Port Isolate Port Channel: • Jumbo Frame • Port Rate • Storm Control MAC Address Config: • Static MAC • Black Hole MAC • Aging-time • MAC Address List